We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Photonics › ONA not giving results -Interconnect › Reply To: ONA not giving results -Interconnect

March 29, 2024 at 5:35 pm
minusunny
Subscriber

 

Thank you. I figured it out. Another concern is , the transmission is not showing up properly at the ONA. I loaded s- parameters from FDTD. I am getting good transmission in FDTD. When i loaded s parameters to the interconnect , the transmission values are so low. Why is this happening? I tried sample files given in the website. They have transmission values. But my  s parameter values have low transmission, even if it is good in FDTD .

 

Minu

Â