We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Named selections not being converted to labels – Ansys Fluent › Reply To: Named selections not being converted to labels – Ansys Fluent

March 26, 2024 at 2:42 pm
Gregory Harrington
Subscriber

That is why I wanted to get these surfaces in before the volume mesh is created so that wont happen, but I also dont want to have a ton of regions. 20 is a lot! If the design changes I can have maybe 30-50 and then that makes the model exponentially more difficult to deal with.

I just want to have 1 region and monitor quantities at intermediate points within the region.

I guess the best way for me to explain it is to have a pipe and I want to monitor quantities at various stations down the length of the pipe. That would be the easiest scenario where I could just make planes and monitor on the planes. But in my case my interrogation surfaces aren't nice easy shapes to work with.