We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Electronics › Validation of force from Transient 3D Maxwell simulation › Reply To: Validation of force from Transient 3D Maxwell simulation

March 18, 2024 at 2:56 pm
GLUO
Ansys Employee

Hi, 

Magnetostatic uses adaptive mesh, but it is still based on mesh operations. I would still recommend to make sure there are multiple layers of mesh in the air-gap and stator by adding dummy band objects. Also, please still use a dummy "motion band" and assign torque to the motion band and everything inside the motion band.

GL