We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › General Mechanical › Contact elements to simulate cold joints › Reply To: Contact elements to simulate cold joints

March 6, 2024 at 3:34 pm
Ricardo Azevedo
Subscriber

1) I know its compressive strength

2) I intend to select the properties by using Granta (the joint material is epoxy)

3) We assume complete adhesion between the blocks

4) Butt joint

5) No reinforcement