Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.

Ansys Learning Forum › Forums › Discuss Simulation › Photonics › Incorrect group delay seen in n-port s-parameter element in INTERCONNECT › Reply To: Incorrect group delay seen in n-port s-parameter element in INTERCONNECT

March 4, 2024 at 3:04 pm
Arka Dipta Das
Subscriber

Here is the comparison of the group delays seen when using the two different settings. In the second case, the GD is very close to the expected value of 2.4e-12.

 

[bingo_chatbox]