We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum Forums Discuss Simulation Electronics Stranded loss in Ansys Maxwell Reply To: Stranded loss in Ansys Maxwell

HDLI
Ansys Employee

Hello Ruchika,

       Please review Maxwell help manual for definations of strandedloss and others.

       1. Yes, it is 100% of area to calculate the DC loss. 

       2, Induced voltage is calcuated by flux linkage, and is Back EMF + voltage drop of inductance. If you want to include resistance voltage drop, you need to use external circuit with phase resistance or manually calculate it and add I*R.

HDLI