Ansys Learning Forum › Forums › Discuss Simulation › Fluids › SOEC (Solid Oxide Electrolyser Cell) – Some questions in Simulations › Reply To: SOEC (Solid Oxide Electrolyser Cell) – Some questions in Simulations

December 1, 2023 at 1:35 pm
Syafawati Hasbi
Subscriber

Hi Aleksey, I found through manual as attached there are two ways to get the current density, it is either on the console, or by surface integral of current density at y direction/ area. I got different current density using both approach, console (1.6A/cm2) and by surface integral (0.049A/cm2) for 0.01m2 fuel cell. Which one should I choose?