We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum Forums Kampus Merdeka Belajar Two or More remote boundary Error Ansys FEM Reply To: Two or More remote boundary Error Ansys FEM

Raihan Lutfianto
Subscriber

Hi Alfandaru. Make sure to revisit the project guide and do the steps carefully. This error usually happens due to an "accumulative" error since the beginning of the simulation. Make sure to not proceed to the next step before you can obtain the exact results from the guide (for the first static structural simulation, check the expected total deformation and for the eigenvalue buckling, check the first load multiplier).

This error could also happen due to incorrect boundary and loading conditions.