您好
您想要的100*100個點,是空間的取樣,這跟網格有關,不知道您的monitor是否跟仿真區寬度相同?
如果相同,建議比較簡單的方法是在FDTD物件的mesh settings頁面客訂網格，指定格點的數量(如上圖)
如果不相同，請用局部mesh物件(如下圖)，算好幾盒頁面的總寬度,以及單格mesh的尺寸倍數關係
莎益博-董冠佑
You are navigating away from the AIS Discovery experience
Ansys Assistant
Welcome to Ansys Assistant!
An AI-based virtual assistant for active Ansys Academic Customers. Please login using your university issued email address.
Hey there, you are quite inquisitive! You have hit your hourly question limit. Please retry after '10' minutes. For questions, please reach out to ansyslearn@ansys.com.
RETRY