We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › DPM: Wall-film particles › Reply To: DPM: Wall-film particles

November 21, 2023 at 12:04 pm
dineshadwani1451
Subscriber

Hi Rob

I am simulating VOF-DPM Simulation. In the model transition tab, I have given 'Volume-Equivalent Sphere Diameter Range' as 0 to 0.5mm. So I considered that it will write the inj file for all particles ranging between these two given values but it is only writing values around 0.1 or 0.2 mm. It has not written particles with small diameters(like 1e-6 or 1e-7) which are visible in the results. Can you please help me on how to include small particles also?

Thanks in advance.

Â