We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › VOF evaporation problem › Reply To: VOF evaporation problem

November 20, 2023 at 3:37 am
not.lah.enough
Subscriber

Anyway, I decreased the inlet velocity (thus flow rate as well) to 0.104 (2% of the original case, so basically almost to a trickle) to supposedly give more time for the liquid ammonia to vaporize. Still no vaporization was observed despite the temperature in the ammonia bubble way exceeding the evaporation temperature.