We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Installation and Licensing › Ansys Products › Sintering of materials with transient thermal distribution › Reply To: Sintering of materials with transient thermal distribution

November 17, 2023 at 9:05 pm
Osama Jadaan
Subscriber

Thank you Ashish, I appreciate your reply. 

I read the paper you suggested. I also read all documentation in ANSYS regarding the sintering models and add-on module, did the tutorials and started my own model. 

The paper you asked me to read only deals with transient heat transfer modeling, which I have no issue with and know how to do. My question was regarding using the transient thermal results as input into the sintering analysis (add-on). how do we go about doing this in ansys. Currently, it seems like ansys assumes constant temperature profile throughout the component at a given time. But what I need is to use a transient temperature profile that varies with time and position with the sintering analysis. 

Thank you.

Osama Jadaan