你好,log是文字檔的格式,會跟您的fsp檔案在相同路徑上,理論上裡面會有停止仿真的原因描述,也包含status了
關於staus在您仿真完的檔案,點著FDTD,result中可以找到,
0是沒有仿真或是沒有紀錄(比如硬盤滿了所以無法紀錄)
1是仿真時長到的,但是仿真區能量還沒到達穩定條件,有可能是路徑很長光還沒走到monitor
2是達到仿真要求的能量穩定所以結束仿真
3是仿真發散了,此時情參考Troubleshooting diverging simulations in FDTD – Ansys Optics
另外是否有其他報錯了?
莎益博-董冠佑
An AI-based virtual assistant for active Ansys Academic Customers. Please login using your university issued email address.
Hey there, you are quite inquisitive! You have hit your hourly question limit. Please retry after '10' minutes. For questions, please reach out to ansyslearn@ansys.com.
RETRY
You are navigating away from the AIS Discovery experience