We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum Forums Discuss Simulation LS Dyna Drilling SPG particles Reply To: Drilling SPG particles

Ram Gopisetti
Ansys Employee

Hi, 

Try setting the ERODE option to 1and try to use 1.6 in dilation parameter and set SMSTEP to 5, check the stretch value and try to use an updated solver. 

Cheers, RamÂ