July 19, 2023 at 11:22 am
Ricardo Mevert
Subscriber

Hello, I installed all the prerequisites on a fresh CentOS und re-ran sudo ./INSTALL -silent. Here's the output after it's done extracting: 

**************************************

RSS is disabled

 

Updating /usr/ansys_inc/shared_files/licensing/init_ansysli ...

Configuring Help ...

ANSYS Internet Doc has been configured.

/usr/ansys_inc/v231/Framework/bin/Linux64/runwb2 -cmd mono /usr/ansys_inc/v231/RSM/bin/AnsConfigRSM.exe
Configuring RSM...

Configuring default RSM and ARC Port numbers for 2023 R1 ...
Done!

Generating daemon scripts for this installation.
AWPROOTDIR = /usr/ansys_inc/v231
Creating RSM Launcher script ...
Created service script: rsmlauncher


AWPROOTDIR = /usr/ansys_inc/v231
Creating ANSYS RSM Cluster Master Service script ...
Created service script: arcmaster


AWPROOTDIR = /usr/ansys_inc/v231
Creating ANSYS RSM Cluster Node Service script ...
Created service script: arcnode

Configuring WB Simulation script files ...
[%wc] Registry Editor
Information in /usr/ansys_inc/v231/aisol/workbench.reg has been successfully entered into the registry.
ansyswbu.exe is not required ...
RegSvr32: DllRegisterServer in /usr/ansys_inc/v231/aisol/dll/linx64/libans.common.controlsu.so succeeded.
RegSvr32: DllRegisterServer in /usr/ansys_inc/v231/aisol/dll/linx64/libans.graphics.controlsu.so succeeded.
RegSvr32: DllRegisterServer in /usr/ansys_inc/v231/aisol/dll/linx64/libans.graphics.graphutilityu.so succeeded.
RegSvr32: DllRegisterServer in /usr/ansys_inc/v231/aisol/dll/linx64/libans.cadint.configmgrcom.so succeeded.
RegSvr32: DllRegisterServer in /usr/ansys_inc/v231/aisol/dll/linx64/libans.cadint.pluginfemcom.so succeeded.
RegSvr32: DllRegisterServer in /usr/ansys_inc/v231/aisol/dll/linx64/libans.cadint.pmexportercom.so succeeded.
RegSvr32: DllRegisterServer in /usr/ansys_inc/v231/aisol/dll/linx64/libfepsexportcom.so succeeded.
RegSvr32: DllRegisterServer in /usr/ansys_inc/v231/aisol/dll/linx64/libagpsenginecom.so succeeded.
Running "/usr/ansys_inc/v231/aisol/.workbench" -cmd -NoMW mono "/usr/ansys_inc/v231/commonfiles/CAD/bin/linx64/Ans.CadInt.CADConfigurationUtility.exe" ...

Log files is /usr/ansys_inc/v231/CADConfigLogs/Latest/CADConfigurationMgr.log
MessageLogger.logFilePath is /usr/ansys_inc/v231/CADConfigLogs/Latest/CADConfigurationMgr.log
ErrorLogger.errorFilePath is /usr/ansys_inc/v231/CADConfigLogs/CADConfigurationMgr.err
CatiaV5 Workbench Reader ..... Configure Success

NX Workbench Reader ..... Configure Success

NX  Workbench Reader ..... Not Configured
Running Graphics Driver Verification and Setup

Configuring ANSYS CFD Post ...

Configuring ANSYS CFX ...
Setting up a default parallel host configuration

Configuring CHEMKIN script files ...

Configuring Energico script files ...

Configuring RDWorkbench script files ...

Configuring FORTE script files ...

Configuring ANSYS TurboGrid ...

Configuring ANSYS script files ...

Configuring ACP ...

Running "/usr/ansys_inc/v231/Tools/mono/Linux64/bin/mono" "/usr/ansys_inc/v231/commonfiles/CAD/bin/linx64/Ans.CadInt.CADConfigurationUtility.exe"

 

Log files is /usr/ansys_inc/v231/CADConfigLogs/Latest/CADConfigurationMgr.log

MessageLogger.logFilePath is /usr/ansys_inc/v231/CADConfigLogs/Latest/CADConfigurationMgr.log

ErrorLogger.errorFilePath is /usr/ansys_inc/v231/CADConfigLogs/CADConfigurationMgr.err

CatiaV5 Workbench Reader ..... Configure Success

 

NX Workbench Reader ..... Configure Success

 

NX  Workbench Reader ..... Not Configured

 

 

Exiting

 

**************************************

What to do now? Has the the installation completed successsfully? If so, how can I license the product considering my licensing manager is running on a seperate Windows Server?Â