We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › A rigid body being moved by water within a dynamic mesh. › Reply To: A rigid body being moved by water within a dynamic mesh.

July 11, 2023 at 7:58 pm
Alassedi
Subscriber

I have re-executed the program as you indicated, reducing the time step value to 1.0E-05 and resetting the Remeshing Interval value to 1. After the fourth time step, the result was as shown in Figure 1 & 2, and the message in Figure 3 was 'floating point exception.' The Residuals plot is shown in Figure 4.

Â