We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Dynamic Mesh: No Remeshing Happening on Axis Boundaries › Reply To: Dynamic Mesh: No Remeshing Happening on Axis Boundaries

July 10, 2023 at 8:13 am
JD_JN
Subscriber

Yes, I did! I probably should have updated that here couple of years ago haha. I was able to resolve it back then by giving a finite thickness to the diaphragm and providing clearances at the top and bottom of the diaphragm. I had to play around with the clearance values as I wanted it to be as small as possible.

Hope this helps! Cheers!