We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › General Mechanical › Ansys Maxwell and Ansys Mechanical › Reply To: Ansys Maxwell and Ansys Mechanical

June 20, 2023 at 3:05 pm
Erik Kostson
Ansys Employee

 

 

 

Hi

 

For Maxwell 3D to Mechanical you can only transfer the electromagnetic forces to a Static Structural system (stress analysis only has displacement degress of freedom, not magnetic and electric, so we can not transfer the last 2, only forces we transfer) to look at stresses, or transfer electromagnetic losses to thermal analysis to calculate the resulting temperatures due to these losses.

See here for some appliccations.

https://www.ansys.com/products/electronics/ansys-maxwell

 

One drags and drop the solution cell from Maxwell to the Static Analysis Setup or Thermal Analysis Setup cell in order to do the above mentioned transfers.

 

All the best

 

Erik

Â