We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Stabilization error for two-phase flow simulation › Reply To: Stabilization error for two-phase flow simulation

June 15, 2023 at 12:25 pm
Saurabh R Patil
Ansys Employee

Hi,

This error message is an indication that equation is diverging. The most likely cause is that the under-relaxation factor (URF) for that equation is too large. Reduce the URF by 10%.

Thank you.