We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Electronics › Ansys Maxwell STAR TO NEUTRAL CONNECTION › Reply To: Ansys Maxwell STAR TO NEUTRAL CONNECTION

February 28, 2023 at 2:17 pm
Navya Chode
Ansys Employee

Hi Vinay,

To define a Y-connection:
1. Click Maxwell 2D (or Maxwell 3D)>Excitations>Setup Y Connection.
The Setup Y Connection dialogue appears.
2. In the Winding list on the left, select the windings to be grouped into a Y connection.
3. Click the Group button to create a Y Connection group with the selected windings.
4. Click OK when all required grouping have been created.

You can refer to the "Setting Up a Y Connection in 2D and 3D Transient Designs" section in Maxwell help

Regards,

Navya

Â