We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › General Mechanical › Element distortion error in my Ansys Structural model › Reply To: Element distortion error in my Ansys Structural model

February 22, 2023 at 12:26 pm
peteroznewman
Subscriber

I suggest you change the frictionless contact to frictional and type in a friction coefficient of 0.1 or higher.  Friction can help stabilize a transient analysis.