We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Photonics › Y axis unit for Lumerical MODE varFDTD output (E, T & etc) › Reply To: Y axis unit for Lumerical MODE varFDTD output (E, T & etc)

February 22, 2023 at 3:52 am
azarulsani
Subscriber

Hi Amrita,

Thanks for the reply.

...T is unitless as it is the power transmitted through the monitor, normalized to the source power...

about this info, sometimes when i set the intensity power (amplitude) to 1, the Transmission graph will sometimes overshoot over 1.0. Is this normal and what could be the reasoning behind this?