We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Photonics – Chinese › FDTD中mode source（not in use）问题 › Reply To: FDTD中mode source（not in use）问题

September 27, 2022 at 3:11 pm
Guilin Sun
Ansys Employee

原则上不应该，你可以将仿真区的YMax变小，添加时间监视器测试看看。确保光源的位于仿真区内，我看到光源ｙ刚好在YMin边界上，适当上移一点，位置没有必要保留如此多小数点。