We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › General Mechanical › Changing young’s modulus in linear elastic 2D model › Reply To: Changing young’s modulus in linear elastic 2D model

September 25, 2022 at 11:56 am
peteroznewman
Subscriber

In this model, with gravity pulling down on the material, when you halve Young’s modulus, the displacement and strain doubles so you have no change in stress because stress = E*strain and the factors of 2 on E and strain cancel each other out.