We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum Forums Discuss Simulation Fluids Warning: 0.1053% of the total discrete phase mass was not tracked Reply To: Warning: 0.1053% of the total discrete phase mass was not tracked

Anadi_Mondal
Subscriber

Hello Rob,

I start the same simulation on two versions- ANSYS 2019 and ANSYS 2021R2. For the case of 2019, it shows the warning 'certain percentage of total discrete phase mass was not tracked ' at the first time step when I stop the simulation and start again. Later, it didn't show any warning.

But for the case of 2021R1 , I got the warning at every time step although I selected high-resolution tracking. I checked with the different time steps but got the same warning. I didn't get any aborted and incomplete particles in the console window.

In this transient simulation, the  residual of the continuity equation varies between 10^-1 and 10^-5.

Why warning frequency is different in different versions? and what is your recommendation now to solve the error?

Anadi