We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Photonics › problem in the situation of inclined incidence with plane wave source › Reply To: problem in the situation of inclined incidence with plane wave source

September 16, 2022 at 2:29 am
liguangrui33
Subscriber

Thank you for your suggestions. I tried with a source setted in time domain with your suggestions in 4.  50fs and off 100fs will still lead to a R=0.011 on the monitor before the source, while 100fs/200fs leads to a R = 0. There are 5 frequencies components shown in the source.

I just realized that when I setted a source not in time domain with a single frequency, the spectrum of the source has actually a significant span (239-299nm). Are the plots on the right of Frequency/Wavelength tab true in case of a single wavelength is setted? Why is it like this?