Yeah, I put a wrong picture of the issue. I already had the geometry loaded on the module and even so, the edit option was not available.
At the end the problem was more related with the CAD configuration inside Ansys:
Thanks a lot for your help! :D
Yeah, I put a wrong picture of the issue. I already had the geometry loaded on the module and even so, the edit option was not available.
At the end the problem was more related with the CAD configuration inside Ansys:
Thanks a lot for your help! :D
You are navigating away from the AIS Discovery experience
Ansys Assistant
Welcome to Ansys Assistant!
An AI-based virtual assistant for active Ansys Academic Customers. Please login using your university issued email address.
Hey there, you are quite inquisitive! You have hit your hourly question limit. Please retry after '10' minutes. For questions, please reach out to ansyslearn@ansys.com.
RETRY