Is MDM the method I'm working with now? I have modified the around plate area to Surface, but the result did not change. I'm sorry I haven't been able to solve this problem.
(Excuse me. In the post of November 9, last case in Table 1 is U=2m/sec, not 0m/sec.)
I found similar discussion, but he may have given up.
/forum/discussion/26263/dynamic-mesh-drag-coefficient
(Excuse me. In the post of November 9, last case in Table 1 is U=2m/sec, not 0m/sec.)
I found similar discussion, but he may have given up.
/forum/discussion/26263/dynamic-mesh-drag-coefficient
You are navigating away from the AIS Discovery experience