Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Quesiton about profile for fluent › Reply To: Quesiton about profile for fluent
October 28, 2021 at 11:00 am
Rob
Forum Moderator
Sort of. You need to give the source a volume rather than a position so it'll be
if( a>1.0 && a<1.2 && b.....
Remember source terms are per m3 so be careful with the definitions.
if( a>1.0 && a<1.2 && b.....
Remember source terms are per m3 so be careful with the definitions.