我勾选了的
我出现的问题在于，我在扫描完一组参数之后，想要用getsweepresult提取出Ex Ey Hx Hy T这五个数据，然后储存在MATLAB中
但最后我在MATLAB中能打开的只有T，其余的参数似乎无法得到，就像下面这个图
You are navigating away from the AIS Discovery experience
Ansys Assistant
Welcome to Ansys Assistant!
An AI-based virtual assistant for active Ansys Academic Customers. Please login using your university issued email address.
Hey there, you are quite inquisitive! You have hit your hourly question limit. Please retry after '10' minutes. For questions, please reach out to ansyslearn@ansys.com.
RETRY