Ansys Learning Forum › Forums › Discuss Simulation › Photonics › HELPquestion for convergence of newton solver in charge › Reply To: HELPquestion for convergence of newton solver in charge
July 29, 2021 at 5:37 pm
kghaffari
Ansys Employee
Hi.
A convergence issue can be due to many different reasons (for example an incorrect setting or the problem being difficult to solve). I recommend looking into this post for some recommendations that could address the problem. Please let us know if you are able to resolve this.
A convergence issue can be due to many different reasons (for example an incorrect setting or the problem being difficult to solve). I recommend looking into this post for some recommendations that could address the problem. Please let us know if you are able to resolve this.