We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › General Mechanical › How to reduce .rst size in ANSYS APDL for a transient analysis? › Reply To: How to reduce .rst size in ANSYS APDL for a transient analysis?

July 21, 2021 at 8:38 pm
dlooman
Ansys Employee
It should be before the first lswrite command. Outres won't cause your boundary conditions applied with the DA command to be ignored if that's what you mean by z=0. Lswrite commands can be replaced with solve commands.