We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Set up a wall that is permeable to fluid and not to particle › Reply To: Set up a wall that is permeable to fluid and not to particle

October 17, 2017 at 6:22 am
admin
Ansys Employee

Set a porous-jump with the following properties: Face permeability = 10e10 m² Porous Medium Thickness = 0 Pressure-Jump coefficient = 0 Still in the Porous Jump panel, set the Discrete Phase BC Type to reflect