We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Setting the start time of a transient calculation › Reply To: Setting the start time of a transient calculation

March 21, 2017 at 11:58 am
vganore
Ansys Employee

 Generally, the start time of an unsteady calculation is 0 s, but you may set the calculation start time arbitrarily by entering the following TUI command: (rpsetvar 'flow-time 0.001) For this example, 0.001 is the calculation start time.