TAGGED: binary-file, mechanical-apdl
-
-
January 28, 2021 at 3:47 amQiuyuhaoSubscriber
Hello,
I am currently using ANSYS 19.2 for secondary development. Although ANSYS has good support for secondary development, I still encountered some problems.
I found that there are no functions related to Section and Material in the Binlib library .That's weird, because they are defined in RstRd.F.
I will be very grateful if anyone can give me some suggestions.
(I used dumpbin commond to figure out the composer of binlib.lib, and found that it dose't have those funcitons)
February 3, 2021 at 8:51 amQiuyuhaoSubscriberCan anyone help menFebruary 3, 2021 at 9:17 amAshish KhemkaForum ModeratorHi @Qiuyuhao, ,nnYou already have post open on the same topic:nnHello, I am currently using ANSYS 19.2 for secondary development. Although ANSYS has good support for secondary development, I still encountered some problems. I found that there are no functions related to Section and Material in the Binlib library .That's weird, because they are defined in RstRd.F. I will be very grateful if anyone can give me some suggestions.(I used dumpbin commond to figure out the composer of binlib.lib, and found that it dose't have those funcitons)https://us.v-cdn.net/6032193/uploads/UVSJ6O8PTA8E/20210125164156.pnghttps://us.v-cdn.net/6032193/uploads/RLPXAYV47EN1/20210125164220.png/forum/discussion/23908/no-section-material-related-function-found-in-binlib-lib
nI will mark this one as resolved.nnRegards,nAshish KhemkannViewing 2 reply threads- The topic ‘No Section/Material related function found in binlib.lib’ is closed to new replies.
Ansys Innovation SpaceTrending discussions- Ayuda con Error: “Unable to access the source: EngineeringData”
- At least one body has been found to have only 1 element in at least 2 directions
- Error when opening saved Workbench project
- How to apply Compression-only Support?
- Geometric stiffness matrix for solid elements
- How to select the interface delamination surface of a laminate?
- Timestep range set for animation export
- Image to file in Mechanical is bugged and does not show text
- Frictional No separation contact
- Elastic limit load, Elastic-plastic limit load
Top Contributors-
1301
-
591
-
544
-
524
-
366
Top Rated Tags© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
-