Learning Forum

[Husain_53]

Dear Friends,nI already ran the duct simulation, and get the result that far above the allowable stress based on ASME B31.nBut after some googling, I've found this articles in ANSYS Conference 2014.nIs it really true that we can divide the stress result we got in ANSYS by 2?.Kind Regards,nArrayn

[Keyur Kanade]

Duplicate of n

Dear Friends,I already ran the duct simulation, and get the result that far above the allowable stress based on ASME B31.But after some googling, I've found this articles in ANSYS Conference 2014.Is it really true that we can divide the stress result we got in ANSYS by 2?https://us.v-cdn.net/6032193/uploads/Q29CU8RS7BYZ/ansys-vs-asme-png.pnghttps://us.v-cdn.net/6032193/uploads/Z4JIMHWHT5KY/ansys-conference-pipe-stress-analysis-different-tools-2c-different-result.pdf/forum/discussion/23188/ansys-vs-asme-b31

n