Not enough ANSYS Hfss Parallel licenses 4/0

- November 3, 2020 at 1:42 am
  
  Amal85
  Subscriber
  
  May I know what cause of this error: Not enough ANSYS Hfss Parallel licenses 4/0.nI tried to enable GPU in HPC option setting for SBR+ simulation but got this error. Please advice.n
- November 4, 2020 at 12:25 am
  
  ANSYS_MMadore
  Forum Moderator
  
  Do you have access to HPC licenses? If so, you need to set your HPC and Analysis Options to use the proper license based on which HPC licensing you have.nnFor anshpcnUse Legacy Electronics HPC: FalsenHPC License Type: Pooln------------------nFor anshpc_packnUse Legacy Electronics HPC: FalsenHPC License Type: Packn------------------nFor hfsshpcnUse Legacy Electronics HPC: TruenHPC License Type: Pooln----------------nFor hfsshpc_packnUse Legacy Electronics HPC: TruenHPC License Type: PacknnThank you,nMattn
- November 4, 2020 at 1:31 am
  
  Amal85
  Subscriber
  
  Thank you Matt. It really helps!!n