Checking Y+ value?

- September 27, 2017 at 11:19 am
  
  admin
  Ansys Employee
  
  How do I check Y+?
- October 17, 2017 at 7:58 am
  
  Arun Kumar
  Subscriber
  
  For a 3D Case 1. Click Display-> Contour-> Turbulance-> Y Plus of the surface of interest. 2. Turn off Node Value display. 3. You can now check if the minimum and maximum Y+ forms an appropriate range For a 2D Case 1.Click Display-> Contour-> Turbulence-> Y Plus. You do not need to select any Surfaces 2.Turn off Node Value display 3.You can now check the value of Y+ (note to ignore the value of Y+ except for cells adjacent to the wall). In a fine mesh, a recommended value of 1 for Y+ in a fine mesh, and 30 to 500 for a wall function.
- April 11, 2020 at 3:04 pm
  
  geoputhussery
  Subscriber
  
  Please mention that the options are displayed in Post-processing
- May 7, 2020 at 4:36 pm
  
  alisul692
  Subscriber
  
  Mr. Arun Kumar I need your advice to plot velocity profile if you can plz?
- May 7, 2020 at 4:43 pm
  
  DrAmine
  Ansys Employee
  
  Profile along a line?