Getting no element data from my analysis

- June 22, 2020 at 9:51 am
  
  KevinG
  Subscriber
  
  Hi,
  
  I'm running structural analysis on a model and am getting values of 0 for element solution data, can anyone help me?
  
  Kind regards
- June 22, 2020 at 11:09 am
  peteroznewman
  Subscriber
  We need to see the following to help you.
  - Geometry
  - Materials
  - Mesh
  - Supports
  - Loads
  - Results
  Use the Insert Image button to place a screen snap file into your post.
- June 22, 2020 at 11:12 am
  
  KevinG
  Subscriber
  
  Thanks Peter, here's my code. Apologies if it's a bit of a mess;
  
  /PREP7
  
  /UIS,MSGPOP,3
  
  /NERR,200,99999999,,0,0
  
  /UNITS,SI
  
  CSYS,0
  
  ET,1,BEAM188
  
  MPTEMP,1,0
  
  MPDATA,EX,1, ,210000000000
  
  MPDATA,PRXY,1, ,0.3
  
  MPDATA,DENS,1, ,7600
  
  SECTYPE,1,BEAM,CSOLID,SolCirc,0,0
  
  SECDATA,0.005,0,0,0,0,0,0,0,0,0,0,0
  
  K,1,0,0,0
  
  K,2,-0.4,0.4,0
  
  K,3,0,0.8,0
  
  K,4,0.3,0.6,0
  
  K,5,0.5,0.7,0
  
  K,6,0.7,0,0
  
  LSTR,1,2
  
  LSTR,2,3
  
  LSTR,3,4
  
  LSTR,4,5
  
  LSTR,5,6
  
  LSTR,6,1
  
  LSTR,1,5
  
  LSTR,2,4
  
  LSTR,1,4
  
  LSEL,ALL, , , , , ,0
  
  LMESH, ALL, ,
  
  ESIZE,0.05
  
  FINISH
  
  /SOLU
  
  ANTYPE, 0
  
  TIMEINT,OFF,ALL
  
  KBC,0
  
  AUTOTS,ON
  
  KSEL,S,KP,,1,2,1
  
  NSLK,S
  
  FK,2,FX,80000
  
  FK,2,FY,40000
  
  FK,2,FZ,0
  
  FK,2,MX,0
  
  FK,2,MY,0
  
  FK,2,MZ,0
  
  KSEL,S,KP,,1,6,1
  
  NSLK,S
  
  FK,6,FX,0
  
  FK,6,FY,20000
  
  FK,6,FZ,0
  
  FK,6,MX,0
  
  FK,6,MY,0
  
  FK,6,MZ,0
  
  NSEL,S,LOC,X,0
  
  NSEL,R,LOC,Y,0
  
  NSEL,R,LOC,Z,0
  
  D,ALL,ALL,0
  
  NSEL,S,LOC,X,0
  
  NSEL,R,LOC,Y,0.8
  
  NSEL,R,LOC,Z,0
  
  D,ALL,UX,0
  
  D,ALL,UY,0
  
  D,ALL,UZ,0
  
  NSEL,S,LOC,X,0.3
  
  NSEL,R,LOC,Y,0.6
  
  NSEL,R,LOC,Z,0
  
  D,ALL,ALL,0
  
  ALLSEL,ALL
  
  SFTRAN
  
  outres,esol,all
  
  SOLVE