Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.

Innovation Space

FREE STUDENT SOFTWARE

I am doing a corona simulation. But particles are not spreading.

- September 7, 2025 at 10:41 am
  
  adib.aktab999
  Subscriber
  
  In my simulation particle injected from the surface of mouth, it should have spreaded to the room but the particles are dropping soon. I have used 2 inlets and one one outlet. The inlets have 3m/s velocity and the outlet is the pressure outlet. I have used water liqid as injection material. i Have ran the simulation for 1 sec. the room volume is 738m^3
- September 8, 2025 at 6:23 am
  
  SRP
  Ansys Employee
  
  Hi,
  If gravity is enabled, heavy water droplets will settle fast. For testing, try to turn gravity off to see if they otherwise spread
- September 8, 2025 at 2:40 pm
  
  adib.aktab999
  Subscriber
  
  Yeah I have tried, still the particles are falling. How can I resolve it?
  should I decrease the particle size or increase the inlet, outlet velocities?
- September 9, 2025 at 5:10 am
  
  adib.aktab999
  Subscriber
  
  Yeah I have tried without gravity, it is same. So I increased the velocity and decrease the diameter. And also I was doing the simulation for 1 sec, that could be a reason.
  I am running for 1 min now. Lettsee

Viewing 3 reply threads

You must be logged in to reply to this topic.

[bingo_chatbox]