Learning Forum

[Losiola]

Hello evryone


Hope you are doing well and safe


 


I have a small issue about importing geometry into ICEM CFD for mesh


 


As you can see in the picture i ve created the 3D Blade in solidworks than imported the Geometry into Design Modeler and made a cylindre around the blade. after that , using the boolean operations i substracted the blad from the cylindre to get the Fluid Domain only and as you can see from the pictures (1+2) (lateral surface of the cylindre is hidden ) that the blade surface is perfectly fine .BUT when i Move to icem CFD and open i ve noticed that the blade surface is not Correct (picture3) (missing peaces for some uknown reason ).


 


Does anyone know what is the problem and how Can i Resolve this issue ?




 


Thank you All

[Keyur Kanade]

please split that surface at 5-6 locations. this will allow more curves on the surface. 

Regards,

Keyur

 

If this helps, please mark this post as 'Is Solution' to help others.

Guidelines on the Student Community

How to access ANSYS help links