Learning Forum

[biomechanik-software]

Hey guys,

 

i am trying to model a Remote Force that is moving and varying in amount from step to step.

Background is that I had an experiment where i loaded the part with a crosstable and the force application moved on that table.

 

My problem is, that i can only define 1 position for the load over all steps.

I can't vary the position of the remote force for every step.

 

Can someone tell me how this is solved?

 

Best regards,

Mischa

[Erik Kostson]

Hi

One way of doing this is as follows :

https://www.youtube.com/watch?v=iMwYtQItt4c

Another way is shown here:

https://www.youtube.com/watch?v=aeRuE9VAnaA

Hope this helps

Erik

[biomechanik-software]

Dear Erik,

 

thank you very much for your reply.

In both those videos the transient structural block was used.

All i want to do is a static structural analysis where the load has a specific position for every step.

For example:
Step 1: [1 1 1]: force in z:25N

Step 2: [1 2 1]: force in z:50N

and so on.

Best regards,

Mischa

[Erik Kostson]

You can do exactly the same inside a static structural system.

All the best

Erik