Learning Forum

[Ailton777]

how can I delete all error file mensajes in APDL?

[Aniket Chavan]

Please explain your question in more detail. Specifically, what is the motive of this? Also. please make sure that you insert the images (if any) inline as Ansys staff can not download attachments from the student community.

 

-Aniket

Guidelines on the Student Community

How to access ANSYS help links

[Ailton777]

 

Thank you for your contact.

when doing a new thermal analysis, there is already a list of errors with several topics before starting to run the script; probably from previous analizes. I don't know how to fix this.

LISTA DE ERROS

 

/COM,ANSYS RELEASE Release 16.0      BUILD 16.0      UP20141203       14:14:02

 

 

 

 *** WARNING ***                         CP =      16.250   TIME= 14:15:12

 

 /CONFIG is not a recognized PREP7 command, abbreviation, or macro.     

 

  This command will be ignored.                                          

 

 

 

 *** WARNING ***                         CP =      16.250   TIME= 14:15:12

 

 /CONFIG is not a recognized PREP7 command, abbreviation, or macro.     

 

  This command will be ignored.                                          

 

 

 

 *** WARNING ***                         CP =      16.250   TIME= 14:15:12

 

 Material property table exceeds the number of defined temperatures.    

 

  Number of temperatures is 13.  The number of data values is 14.       

 

 

 

 *** WARNING ***                         CP =      19.359   TIME= 14:15:16

 

 All of the selected volumes in the set named on the VMESH command were 

 

 already meshed.  Clear associated elements before remeshing.           

 

 

 

 *** WARNING ***                         CP =      85.094   TIME= 14:16:17

 

 An inactive degree of freedom label (UX) was found on the D command.   

 

 The current degree of freedom set is: TEMP                             

 

  This degree of freedom will be ignored.                               

 

 

 

 *** WARNING ***                         CP =      85.094   TIME= 14:16:17

 

 An inactive degree of freedom label (UY) was found on the D command.   

 

 The current degree of freedom set is: TEMP                              

 

  This degree of freedom will be ignored.                               

 

 

 

 *** WARNING ***                         CP =      85.094   TIME= 14:16:17

 

 An inactive degree of freedom label (UZ) was found on the D command.   

 

 The current degree of freedom set is: TEMP                             

 

  This degree of freedom will be ignored.                               

 

 

 

 *** WARNING ***                         CP =      85.094   TIME= 14:16:17

 

 No valid degree of freedom labels were input.  The D command is        

 

 ignored.                                                               

 

 

 

 *** WARNING ***                         CP =      85.109   TIME= 14:16:17

 

 An inactive degree of freedom label (UX) was found on the D command.   

 

 The current degree of freedom set is: TEMP                             

 

  This degree of freedom will be ignored.                               

 

 

 

 *** WARNING ***                         CP =      85.109   TIME= 14:16:17

 

 An inactive degree of freedom label (UY) was found on the D command.   

 

 The current degree of freedom set is: TEMP                             

 

  This degree of freedom will be ignored.                               

 

 

 

 *** WARNING ***                         CP =      85.109   TIME= 14:16:17

 

 An inactive degree of freedom label (UZ) was found on the D command.   

 

 The current degree of freedom set is: TEMP                             

 

  This degree of freedom will be ignored.                               

 

 

 

 *** WARNING ***                         CP =      85.109   TIME= 14:16:17

 

 No valid degree of freedom labels were input.  The D command is        

 

 ignored.                                                               

 

 

 

 *** WARNING ***                         CP =      85.156   TIME= 14:16:17

 

 An inactive degree of freedom label (UX) was found on the D command.   

 

 The current degree of freedom set is: TEMP                             

 

  This degree of freedom will be ignored.                               

 

 

 

 *** WARNING ***                         CP =      85.156   TIME= 14:16:17

 

 No valid degree of freedom labels were input.  The D command is        

 

 ignored.                                                               

 

 

 

 *** WARNING ***                         CP =      85.203   TIME= 14:16:17

 

 An inactive degree of freedom label (UX) was found on the D command.   

 

 The current degree of freedom set is: TEMP                             

 

  This degree of freedom will be ignored.                               

 

 

 

 *** WARNING ***                         CP =      85.203   TIME= 14:16:17

 

 No valid degree of freedom labels were input.  The D command is        

 

 ignored.                                                               

 

 

 

 *** WARNING ***                         CP =      85.297   TIME= 14:16:17

 

 The NODAL LOAD label of FY is not part of the currently active set.    

 

  The current NODAL LOAD set is: HEAT .                                 

 

 

 

 *** WARNING ***                         CP =     119.422   TIME= 14:16:40

 

 Entity 10000004 is undefined.  The NSEL command is ignored.            

 

 

 

 *** WARNING ***                         CP =     303.312   TIME= 14:190

 

 Material property KXX of material 1 of element 1 is evaluated at a     

 

 temperature of 5.29357924, which is below the supplied temperature     

 

 range.  Temperature range checking terminates.                         

 

0***** process error reported by subroutine   xdslfa

 

       see    xdslfa abstract (ier =  -598)

 

 

 

 

 

 *** ERROR ***                           CP =   25287.547   TIME= 20:22:04

 

 The Sparse Matrix solver was aborted by jobname.abt or the STOP button 

 

 was pressed.                                                           

 

/COM,ANSYS RELEASE Release 16.0      BUILD 16.0      UP20141203       22:44:29

 

 

 

 *** WARNING ***                         CP =      13.234   TIME= 22:45:07

 

 /CONFIG is not a recognized PREP7 command, abbreviation, or macro.     

 

  This command will be ignored.                                          

 

 

 

 *** WARNING ***                         CP =      13.234   TIME= 22:45:07

 

 /CONFIG is not a recognized PREP7 command, abbreviation, or macro.     

 

  This command will be ignored.                                         

 

 

 

 *** WARNING ***                         CP =      13.250   TIME= 22:45:07

 

 Entity 1 is undefined.  The MPDELE command is ignored.                 

 

 

 

 *** WARNING ***                         CP =      13.266   TIME= 22:45:07

 

 Material property table exceeds the number of defined temperatures.    

 

  Number of temperatures is 13.  The number of data values is 14.       

 

 

 

 *** WARNING ***                         CP =     534.609   TIME= 22:53:20

 

 Material property KXX of material 1 of element 16 is evaluated at a    

 

 temperature of 13.2156091, which is below the supplied temperature     

 

 range.  Temperature range checking terminates.                         

 

 

 

 *** WARNING ***                         CP =   60761.141   TIME= 12:55:00

 

 The view for graph plots is currently NOT changeable.                  

 

  To enable graph view manipulation, issue /GROPTS,VIEW,1.              

 

 

 

 *** WARNING ***                         CP =   60761.156   TIME= 12:55:05

 

 The view for graph plots is currently NOT changeable.                  

 

  To enable graph view manipulation, issue /GROPTS,VIEW,1.              

 

 

 

 *** WARNING ***                         CP =   60761.172   TIME= 12:55:06

 

 The view for graph plots is currently NOT changeable.                  

 

  To enable graph view manipulation, issue /GROPTS,VIEW,1.              

 

 

 

 *** WARNING ***                         CP =   60761.188   TIME= 12:55:10

 

 The view for graph plots is currently NOT changeable.                  

 

  To enable graph view manipulation, issue /GROPTS,VIEW,1.              

 

 

 

 *** WARNING ***                         CP =   60761.203   TIME= 12:55:11

 

 The view for graph plots is currently NOT changeable.                  

 

  To enable graph view manipulation, issue /GROPTS,VIEW,1.              

 

 

 

 *** WARNING ***                         CP =   60761.219   TIME= 12:55:12

 

 The view for graph plots is currently NOT changeable.                  

 

  To enable graph view manipulation, issue /GROPTS,VIEW,1.              

 

 

 

 *** WARNING ***                         CP =   60761.234   TIME= 12:55:14

 

 The view for graph plots is currently NOT changeable.                  

 

  To enable graph view manipulation, issue /GROPTS,VIEW,1.              

 

 

 

 *** WARNING ***                         CP =

[Aniket Chavan]

There are numerous warnings and only one error. The error indicates that you have stopped the analysis by clicking on the stop button.

-Aniket

Guidelines on the Student Community

How to access ANSYS help links

[Ailton777]

Thank you.

I understood; my notebook was with hibernate active.