patch conforming tetrahedron error- Help

- February 7, 2020 at 9:09 pm
  
  garym
  Subscriber
  
  Hello,
  
  This erroratch conforming tetrahedron mesh failed because of an edge intersection in the boundary mesh, we keep getting this error when we attempt to mesh in ANSYS before performing our CFD. We cannot continue forward with testing until this is resolved. attached files below.
  
  Thanks!
- February 7, 2020 at 10:03 pm
  
  peteroznewman
  Subscriber
  
  What CAD tool created the fluid domain?
  
  What CAD tool created the solid bodies that enclose the fluid?
  
  There is probably a geometry error that needs to be repaired before the mesher can successfully mesh this fluid domain. Open the geometry in SpaceClaim and use the tools on the Repair tab to fix any geometry problems detected.
- February 7, 2020 at 10:41 pm
  
  garym
  Subscriber
  
  I used SolidWorks to create the geometry and Imported it to ansys 19.2 workbench. Once you go to the repair tab what would you click on to fix these problems?
- February 8, 2020 at 2:01 am
  
  peteroznewman
  Subscriber
  
  In the Fix tools, try the Extra Edges tool.
  
  How did you create the fluid volume?