We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum Forums Discuss Simulation Fluids HET_RXN_RATE UDF Reply To: HET_RXN_RATE UDF

sjohn
Subscriber

My current model uses 864k cells to get things going but I have created mesh with 2-8 million cells that I can use to fine tune. I also have access to HPC.

I am hoping to model spray structure, heat transfer and chemical species formation using VOF with hereteogeneous UDF.

I have seen literature where Eulerian with heterogeneous UDF was found to be unstable for Fluent 16.2:

"Through these simulations it was concluded that with the setup used in this simulation
it is not possible to simulate the fluid flow in a monopropellant rocket engine in ANSYS
Fluent 16.2 due to stability issues connected to the Eulerian multiphase model and by
enabling the heterogeneous reaction model modelled in the mixture multiphase model."