We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Innovation Space

FREE STUDENT SOFTWARE

How to implement finite rejection ratio notch filter in INTERCONNECT?

- December 10, 2024 at 5:51 am
  
  m.belchovski
  Subscriber
  
  Hi,
  how can I implement a finite rejection ratio optical notch filter in INTERCONNECT? Do you have any suggestions on how to model the rejection ratio? My setup is as shown on the picture. Thanks.
- December 11, 2024 at 12:49 am
  
  Kyle
  Ansys Employee
  
  Hi, I don't think there is a built-in element in the Element Library that will do this. You will have to create a custom element with S-parameters. The best way to do this is probably with a Scripted Element that uses the setsparameter command. The "Frequency Dependent Transmission" element in the "scripted_elements.icp" file on the Scripted Element page uses this approach. You can use this to set the amplitude of the S-parameters to match the amplitudes of your filter.

Viewing 1 reply thread

You must be logged in to reply to this topic.

Ansys Assistant

Hey there, you are quite inquisitive!
You have hit your hourly question limit.
Please retry after '10' minutes.
For questions, please reach out to ansyslearn@ansys.com.

RETRY

Are you sure you want to leave? The window will be closed.

OK