We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Photonics › ports in INTERCONNECT › Reply To: ports in INTERCONNECT

December 4, 2024 at 6:16 pm
GWANG
Ansys Employee

Hi Eva,

Thank you for the post. I would recommend using the "fork" element to split the signal. The fork element doesn't have a signal type, and once it's connected to an electrical port, it will be converted to electrical fork: https://optics.ansys.com/hc/en-us/articles/360036619993-Fork-1xN-FORK-INTERCONNECT-Element.