We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Help! problem about the plane in CFD post › Reply To: Help! problem about the plane in CFD post

November 4, 2024 at 4:59 pm
Rob
Forum Moderator

Or top and bottom! The mesh is OK, but I suspect the resolution and cell density could become a problem. You may also want to adjust the inflation mesh to keep an aspect ratio of around 1 given the surface tension forces on the droplet and particles. This is not going to be a fast simulation.Â