Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.

Ansys Learning Forum Forums Discuss Simulation Fluids The total mass flow rate in DPM model Reply To: The total mass flow rate in DPM model

Rob
Forum Moderator

The inlet (flow) mass flow is not linked to the DPM (injected) flow directly. If the DPM model isn't coupled the particles have no effect on the carrier phase flow. 

So, if you increase the injection mass but don't have coupling then there will be no effect on the flowfield. As we track parcels you'll also not see any additional tracks. 

[bingo_chatbox]