Learning Forum

[maabbas]

Dear all, any recommendation in how to figure the exact error that terminated solution of the attached model, because nothing is listed in the solver output.

[harshvardhan.negi]

Hi,
It will be better if you would share what error you are getting in Solver Output. In Solver Output search (ctrl + F) for error and share the screenshot of the error detail.

Regards,
Harshvardhan
Ansys Help
Ansys Learning Forum (Rules & Guidelines)

[maabbas]

*** NOTE ***                            CP =      35.078   TIME= 13:02:45
 The model data was checked and warning messages were found.            
  Please review output or errors file (                                 
 D:\Concrete-Precompression\Final-ActualSpring\_ProjectScratch\ScrDF8A\f
 file0.err ) for these warning messages.      

 

                        

 

 

*** NOTE ***                            CP =      35.609   TIME= 13:02:45
 The step data was checked and warning messages were found.             
  Please review output or errors file (                                 
 D:\Concrete-Precompression\Final-ActualSpring\_ProjectScratch\ScrDF8A\f
 file0.err ) for these warning messages. 

 

 

 

 

*** NOTE ***                            CP =     427.312   TIME= 13:09:18
 The step data was checked and warning messages were found.             
  Please review output or errors file (                                 
 D:\Concrete-Precompression\Final-ActualSpring\_ProjectScratch\ScrDF8A\f
 file0.err ) for these warning messages.                                

 However the I do have this folder in my directory even with showing the hidden files 

 

[maabbas]

I found this in the file0.err

/COM,ANSYS RELEASE 2023 R1           BUILD 23.1      UP20221128       13:02:35

 *** WARNING ***                         CP =      34.406   TIME= 13:02:44
 Element shape checking is currently inactive.  Issue SHPP,ON or         
 SHPP,WARN to reactivate, if desired.                                    

 *** WARNING ***                         CP =      35.609   TIME= 13:02:45
 Material number 13 (used by element 167206) should normally have at     
 least one MP or one TB type command associated with it.  Output of      
 energy by material may not be available.                                

 *** WARNING ***                         CP =      38.844   TIME= 13:02:49
 Maximum friction coefficient 0.6 is defined in the model.  Switch to    
 the unsymmetric solver (NROP,UNSYM) instead if convergence difficulty   
 is encountered.                                                         

 *** WARNING ***                         CP =     427.141   TIME= 13:09:18
 Material number 13 (used by element 167206) should normally have at     
 least one MP or one TB type command associated with it.  Output of      
 energy by material may not be available.                                

[Erik Kostson]

Hi

Can you run it for a shorter time duration: total time=0.5 E-3 second instead.

Clear all generated data before solving.

All the best

Erik